铅锌多金属矿分段浓缩选别技术的研究与应用

通过多碎细磨、原矿分级溢流优先浓缩脱水,进行了高浓度选铅银、选锌,锌尾矿再浓缩脱水选硫、选锰,同时匹配合理的选矿药剂,原矿浓缩水回用于磨矿分级和选铅,锌尾浓缩水回用于选锌,尾矿浓缩水回用于选硫、选锰,剩余各种废水经适度处理回用于选铅和磨矿分级等,使一段磨矿细度-74μm从70%提高到80%,铅、锌、硫入选初始浓度分别提高到50%、40%、50%,选矿废水全部分质回用。铅锌硫银回收率分别提高了1.5、2.83、13.57、1.01个百分点,硫精矿主品位从38.9%提高到46.5%,设备减少40%、能耗降低25%,节约了选矿药剂消耗和废水处理费用,实现了铅锌多金属矿产资源的高效回收和节能环保。     

Evaluation of the electrical integrity of E-textiles subjected to environmental conditions

E-textiles contain electrically conductive elements and electronic devices that are integrated in textile substrate. Wearable e-textiles are expected to perform like textiles in terms of breathability, conformability, and comfort despite the presence of the electrically conductive elements and electronics. E-textiles are also expected to provide reliable data and signal processing like electronic devices while they are subjected to normal wear and tear under different environmental conditions. The goal of this research was to investigate the electrical integrity of e-textiles while they are subjected to environmental conditions. Different woven samples of electronic-improved outer tactical vest with two narrow conductive traces woven in the warp direction were subjected to range of temperatures and humidity, including extreme conditions. The effects of formation parameters (e-yarn type, number of e-yarns/trace, and weldability), temperature, and humidity on the integrity of the e-textiles were studied. It was found that resistance of networks was affected by changes in air temperature and humidity and the quality of the weld had the greatest impact on electrical integrity of the conductive network. This impact was pronounced in more extreme environmental conditions, which revealed that there was a strong interaction between the weldability, temperature, and humidity.     

不同煤层掘进工作面瞬变电磁法探测应用研究

煤矿井下瞬变电磁法成为煤矿井下超前探测工作的重要手段，在矿井水害预测预报上发挥着很大的作用。随着矿井上组煤层资源的逐渐枯竭，煤矿开采资源逐渐延伸向下组煤层。同一井田范围内同煤层及其顶底板的岩性特征一般相差不大，瞬变电磁法在同煤层施工过程中接收到的物理背景场较为接近；而不同煤层及其顶底板岩性特征通常会有较大的差别，瞬变电磁法在不同煤层施工过程中会接收到差别较大的物理背景场。当矿井存在多煤层开采时，通过大量数据研究瞬变电磁法在不同煤层巷道探测中的响应特征规律，分析并掌握不同煤层条件对瞬变电磁法探测结果的影响，能够提高瞬变电磁法在多煤层探测成果的准确性。     

碳酸盐岩裂缝性储层常规测井评价方法

哈萨克斯坦K油田石炭系KT-Ⅱ段储层为开阔台地相中低孔、特低渗灰岩储层，裂缝对改善储层的渗流能力至关重要，前人研究的利用常规测井资料评价碳酸盐岩储层裂缝的方法由于受裂缝产状、饱和度、泥浆侵入深浅等多方面因素的影响，存在确定性差、容易误判的缺陷。基于研究区目的层段有限的取心和电成像测井资料，结合孔隙型储层和裂缝-孔隙型储层测井响应特征，提出了利用补偿中子确定基块岩石电阻率与基块声波时差，再比较二者与深侧向电阻率、声波时差的差异特征，进而综合识别储层不同产状裂缝发育段，最后建立了裂缝孔隙度、次生孔隙度、裂缝渗透率、总渗透率等储层参数的测井解释模型，实现了利用常规测井资料对碳酸盐岩油藏储层的裂缝识别及参数定量评价。该方法应用的测井综合评价成果与取心物性分析、生产动态情况能够更好地匹配，为该类油藏的合理高效开发提供了依据。     

细粒尾矿综合利用技术研究

姑山矿业公司为提高细粒尾矿的综合利用率，研究分析了细粒尾矿的性质，系统研究了尾矿含量、煅烧工艺制度对不同成分体系尾矿陶粒堆积密度、表观密度、空隙率、吸水率、筒压强度及软化系数的影响。研究得出了全尾矿陶粒、细粒尾矿+污泥陶粒、细粒尾矿+污泥+粉煤灰陶粒3种成分体系的尾矿陶粒较优的尾矿含量及煅烧工艺制度，且3种尾矿陶粒均可代替石头用作粗集料。     

A first-principles investigation on mechanical and metallic properties of titanium carbides under pressure

The titanium carbides are potential candidates to achieve both high hardness and refractory property. We carried out a structural search for titanium carbides at three pressures of 0 GPa, 30 GPa and 50 GPa. A phase diagram of the Ti-C system at 0 K was obtained by elucidating formation enthalpies as a function of compositions, and their mechanical and metallic properties of titanium carbides were investigated systematically. We also discussed the relation of titanium concentration to the both mechanical and metallic properties of titanium carbides. It has been found that the average valence electron density and tractility improved at higher concentrations of titanium, while the degree of covalent bonding directionality decreased. To this effect, the hardness of titanium carbide decreases as the content of titanium increases. Our results indicated that the titanium content significantly affected the metallic properties of the Ti-C system.     

高性能通用DSP寄存器扩展设计实现方法

本文提出一种高性能通用DSP扩展寄存器的设计及实现方法,该方法是我国自主研发的高性能通用DSP中实现寄存器堆扩展的一种新方法,其优点是在不影响现有指令集及指令机器码位宽的前提下,实现对处理器内部寄存器堆的成比例扩展。通过在我国自主研制DSP上的实际应用,证明了该扩展方法的有效性和实用性。     

The control of paracetamol particle size and surface morphology through crystallisation in a spray dryer

The parameters governing the crystallisation of paracetamol using various conventional techniques has been extensively studied, however the factors influencing the drug crystallisation using spray drying is not as well understood. The aim of this work was to investigate the crystallisation of an active pharmaceutical ingredient through evaporative crystallisation using a spray dryer to study the physicochemical properties of the drug and to use semi-empirical equations to gain insight into the morphology and particle size of the dried powder. Paracetamol solutions were spray dried at various inlet temperatures ranging from 60 °C to 120 °C and also from a series of inlet feed solvent compositions ranging from 50/50% v/v ethanol/water to 100% ethanol and solid-state characterisation was done. The size and morphology of the dried materials were altered with a change in spray drying parameters, with an increase in inlet temperature leading to an increase in particle Sauter mean diameter (from 3.0 to 4.4 µm) and a decrease in the particle size with an increase in ethanol concentration in the feed (from 4.6 to 4.4 µm) as a result of changes in particle density and atomised droplet size. The morphology of the dried particles consisted of agglomerates of individual crystallites bound together into larger semi-spherical agglomerates with a higher tendency for particles having crystalline ridges to form at higher ethanol concentrations of the feed.     

紫金山东南矿段成矿期次、阶段浅析

通过对紫金山东南矿段铜钼(金)矿床地质矿化特征分析,指出铜钼矿化带主要赋存于花岗闪长斑岩的内外接触带,处于似斑状花岗闪长斑岩的上部,金矿化带赋存在表生氧化带的英安玢岩、隐爆角砾岩中。经过对矿石的组构特征、矿物生成顺序等特征分析,将矿床的成矿演化过程分为斑岩热液期、高硫化浅成低温热液期、表生氧化期三个主要矿化期次,进一步将斑岩热液期分为黑云母-钾长石化阶段、石英-绢云母化阶段、碳酸盐化阶段三个阶段;高硫化浅成低温热液期分为地开石化阶段、明矾石化阶段、硅化阶段三个阶段。研究结果为进一步研究矿床成因提供了依据。